Tap replacement and repair is one of the most frequently requested plumbing services, covering everything from fixing a dripping kitchen tap to installing a new set of basin or bath taps. A dripping tap wastes thousands of litres of water per year and can cause limescale buildup around the sink or basin, while a stiff, leaking, or broken tap makes daily tasks frustrating. Our plumbers carry a comprehensive stock of washers, cartridges, O-rings, ceramic disc valves, and other common tap components, meaning most repairs can be completed on the first visit. When a repair is not viable — because the tap is corroded, obsolete, or you simply want an upgrade — we fit replacement taps from all major brands including Bristan, Grohe, Hansgrohe, and Ideal Standard. Tap replacement involves isolating the water supply, disconnecting the old tap, cleaning the mounting surface, fitting the new tap with flexible connectors, and testing for leaks. We work on kitchen sinks, bathroom basins, baths, utility room sinks, and outdoor taps across properties throughout the Banbury area. Our engineers bring the tools and fittings needed for all common mounting types including single-hole, two-hole, three-hole, and wall-mounted tap configurations.
We inspect the tap to determine whether a repair is viable — checking the valve, cartridge, washer, and body for wear or damage. We advise whether a repair or replacement is the best option.
The hot and cold water supply to the tap is isolated using service valves beneath the sink or, if no isolation valves are fitted, at the main stopcock. We can fit new isolation valves as part of the job.
For repairs, the faulty component is replaced — a new washer, ceramic disc cartridge, or O-ring. For replacements, the old tap is removed, the mounting area cleaned, and the new tap installed with fresh flexible connectors.
The water supply is restored and the tap is tested across its full range. We check for leaks at every connection point and ensure the tap operates smoothly with correct hot and cold alignment.
Tap repairs in the Banbury area typically cost between £60 and £100 depending on the type of repair needed. Tap replacement, including fitting a customer-supplied tap, costs between £80 and £150 per tap. If we supply the tap, the unit cost is additional. We provide a fixed price before starting and there is no call-out fee. Fitting isolation valves where none exist is recommended and costs around £30 to £50 per valve.
Most dripping taps can be repaired by replacing the washer or ceramic disc cartridge inside the valve. This is a quick and inexpensive fix. However, if the tap body is corroded, the valve seat is damaged, or replacement parts are no longer available, a new tap is the better option.
Absolutely. We are happy to fit customer-supplied taps. We recommend checking that the new tap is compatible with your sink or basin mounting holes — single-lever taps need one hole, traditional taps may need two or three. If in doubt, send us a photo and we can advise before you purchase.
Yes. We install new outside taps including running the pipe from your internal water supply through the external wall, fitting an isolating valve inside for winter shutdown, and mounting a frost-proof or standard bib tap outside. Installation typically takes one to two hours.